- Joined
- 21 June 2009
- Posts
- 5,880
- Reactions
- 14
No what?
The last flood was mismanagement of Wivenhoe spill. But as hydrologists pointed out it, would have been even more epic if development hadn't increased the flood plain.
I'm not debating climate change, just offering an observation. The last one cost me tens of thousands of money so I'm rather interested in Wivenhoe and it's function.
You might be interested in this:
http://www.qhatlas.com.au/brisbane-floods-1893-summer-sorrow
Development increased the flood plain?
The ‘history books’, however, may also tell a different story of history repeating itself in tragic and predictable fashion. Questionable planning decisions, dubious waterfront development and the alleged parsimony of the insurance industry were all upshots of the disaster. While reducing the flood by approximately forty percent, many were shocked that Wivenhoe could not stop the flood water. Following the dam operation manual, the necessity to release water to ensure integrity of the dam wall caused downstream flooding.
http://www.qhatlas.com.au/brisbane-floods-1893-summer-sorrow
The flood has been termed a “dam release flood” by hydrologists appointed by the Insurance
Council of Australia. This suggests that a release of water from the Wivenhoe Dam was a principal
cause of flooding along the mainstream and tributaries of the Brisbane River downstream of the dam
over the period 11th–12th January 2011. Whilst the dam operators were acting in accordance with the
operations manual for the dam, their modeling did not take account of forecast rainfall in determining
the predicted dam water level, and this resulted in a sub-optimal water release strategy.
https://riskfrontiers.com/pdf/water-03-01149.pdf
Structures: Structures that are placed in a creek or waterway, for example culverts in an urban drainage
system or bridges in a river, reduce the water-carrying capacity of the waterway and may contribute to flooding. Debris can also become entangled on these structures, worsening this process. Levees along a waterway are designed to protect areas behind the levee from floods up to a certain level, but their constraining influence on flood flows can cause upstream flood levels to be higher than they otherwise would be. Road and railway embankments, with insufficient cross-drainage capacity (for example, use of culverts), can block off parts of the floodplain with a similar effect. Once levees or embankments are overtopped or breached, the way floodwaters spread over a floodplain can alter significantly and the impact of flooding is often severe.
http://www.chiefscientist.qld.gov.a...s/floods/understanding-floods_full_colour.pdf
The "Development" hardly contributed to the flood plain but actually made the flooding worse as the man made levees to protect the urbanisation increased the height of the water.
That is what I meant by "NO"