- Joined
- 24 November 2009
- Posts
- 58
- Reactions
- 1
Little bit frustrating but that comes with the territory.
Practicing patience is probably one of an investors most powerful assets.
At least youve still VIL to look forward to Condog, short time wise anyway.
KENNEDY #1H - OPERATIONS UPDATE
Aurora Oil & Gas (“Aurora”) is pleased to provide the market with the following update on operations at the Kennedy #1H well.
Aurora has been advised by the Operator, Texas Crude Energy Inc (“TCEI”), that the isolation plugs set as part of the fracture operations have been drilled out and the well commenced unloading at 0100 hrs on Thursday 28th 2010 (USCST). The initial production rate flowing to sales at 0700 hrs on Saturday 30th January (USCST) using a 22/64 choke was 4.39 mmscf/d gas and 1,132 bpd of condensate. The water production rate, from the recovery of frac fluids, was 408 bwpd.
Whilst these initial rates are very encouraging, the following points should be noted:-
• This is an initial production rate during clean up and is not yet indicative of a short or long
term production profile.
• The well still has considerable fluids to recover from the fracture stimulation operations.
• The well is flowing from approximately 2,200 ft of stimulated Eagle Ford Shale with the
remainder of the 4,000 ft horizontal liner isolated and not contributing.
• The well is currently producing through the 7" production casing, a production tubing string
will be installed in due course.
Aurora Executive Chairman Jon Stewart commented "It is early days but these initial flow rates are extremely encouraging including of course the expected high condensate ratio. We look forward to seeing how the well cleans up and to the imminent frac stimulation of our existing Weston well.
Further production performance data will also be gained as Hilcorp complete their farmin obligations across all three AMIs that Aurora participates in. We anticipate a very active year."
Aurora will continue to advise the market on production rates as part of our regular updates or as specifically required.
Yours sincerely
AURORA OIL & GAS LIMITED
murphy had a well doing this..
We are off to a great start with our Eagle Ford Shale program in south Texas. We recently announced the discovery at our first well, the George Miles number one drilled in McMullen County.
Initial rate of flow from the well was approximately 7.5 million cubic feet a day. This was increased to 11.7 million cubic feet a day once tubing was run.
once the production string is put in the well can perform a lot better again..
imho the result is exceptional. and hilcorp imho will go full steam ahead.. look out karnes county!!
Petrohawk Reserves Top Forecast
by Eric Chenoweth | 01 Feb 10
On Monday, Petrohawk Energy HK reported that year-end proved reserves were 2.75 trillion cubic feet equivalent (tcfe) (compared with 1.4 tcfe at year-end 2008). ................
The Eagle Ford Shale added 294 billion cubic feet equivalent (bcfe)........
UPDATE 1-Pioneer says Eagle Ford results top expectations
Oil and gas company Pioneer Natural Resources Inc (PXD.N) said initial production from its second well in the Eagle Ford shale in Texas beat its estimates and it is looking for a joint venture for the shale, with bids expected in the second quarter.
"With the highest gas rate reported to date in the play, the Crawley z1 exceeded our expectations and confirms that dry gas wells provide strong economics at today's prices," CEO Scott Sheffield said in a statement.
In October, the company said its Sinor z5 well in the Eagle Ford shale saw an initial rate of about 11.3 million cubic feet of natural gas equivalent per day (mmcfed).
ConocoPhillips Reports Fourth-Quarter Earnings of $1.2 Billion
HOUSTON--(BUSINESS WIRE)--ConocoPhillips (NYSE:COP):
..... the company continues to see good results from our Eagle Ford shale
Pioneer beefs up Eagle Ford shale efforts
HOUSTON, Jan. 20 -- Pioneer Natural Resources Co., Dallas, completed its second South Texas Eagle Ford shale well, formed an Eagle Ford asset team, and is pursuing a joint venture with bids expected in the second quarter.
The company turned to sales its Robert Crawley Gas Unit-1 well in Live Oak County which flowed 17 MMcfd of gas ......
The Eagle Ford shale at the Crawley location, 3 miles south of Pioneer’s liquids-rich Sinor-5 discovery well, is 1,000 ft deeper and has a 30% thicker pay zone than at the Sinor location.
The well’s goal was to test productivity towards the dry gas window in a deeper, thicker Eagle Ford shale section with a longer lateral and additional frac stages. With the highest gas rate reported to date in the play, Crawley-1 exceeded the company’s expectations and confirmed that dry gas wells provide strong economics at today’s prices
Posting unverified rumours on ASF is simply not on.
If you are not prepared to identify your source or confirm a rumour with the company involved then please do not post it on the forums. Just for the record, anonymous forum chatter and unidentified 'friends' or 'associates' do not qualify as a legitimate source.
Some rumours, of course, do turn out to be accurate but many are simply made up and used to ramp stocks up or down. It is this aspect that troubles me and is the reason I do not want them posted here at ASF.
Youve deleted this, and now casue my post is the last one makes me look like i started the rumour.....
Let me set the record straight...it was not me.....
i think aut with its acreages are surely going to be temptation for many??
Sorry Condog - didn't want to leave that impression - for the record it was not Condog who started a rumour, the rumour posts have been deleted.
not much available to but in this company at the moment ... could see a real break out if there is some market attention grabbing news. .. slowly picking some up today ...
IMHO Its going to be a very big 12 months for all AMI companies (AUT, ADI, EKA)
It has significantly more acerage....
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?