- Joined
- 18 February 2006
- Posts
- 4,200
- Reactions
- 2
Hi YT,I have found anohter Iron Ore gem and unfortunately its started running alot sooner than I had hoped, so before it runs to far I'm starting an FWL thread.
This company is looking at producing Pig Iron which should generate $75m a yr in EBIT for 30yrs vs a current mkt cap of $21m
It has a largish low scal magnetite deposit,
We can expect a JORC in 1-2weeks
With a PFS By start of JULY,
I am seeking to get a discussion going to assess whether my assements of the company are reasonable
At 25c Current Mkt Cap = $21m
An EBIT of $75m a yr for 30yrs = NPV $1Billion+ (EBIT of $2.25Billion)
So I'd say once PFS is out I'd expect a mkt cap of $50m minimum = 60c
Advantages
- Management = Ex MIS MD in charge of their Magnetite Project, Excel Coal
- TOP 20 = Hold 80% so very tight
- Capital raisings will be done sparingly = When they issued rights options instead of being free or 1c they were at a 4c cost so company could raise $1m from the rights, sounds very very prudent to me
- Infrastructure amazing, on the main highway to Port Geralton = truck ore no rail! 14kms away from main town of Yalgoo, can use all exisiting port facilities, gas and water run through or near deposit
- Mkt cap tiny vs NPV
- Backed by Martin Place
- Pig Iron in high demand, much higher than magnetite ore as its a value added product
- Japanese Steel firm Kobe already taking Iron Ore samples, they could easily underwrite the development of Yogi project
Disadvantages
- Cap Ex = $350m+
It all looks good but I want to hear some others thoughts and feedback,
p.s. DYOR!
Hello friends,
The most important factor as to whether FWL will realise their goals is in the technology they end up using.
FWL have just sent samples to Japan to see if they are suitable for FASTMET ®, Corex, Circofer and a new emerging technology, ITmk3 ®.
Is there anyone out there who knows about these processes first hand?(especially ITmk3)?
I found these links, but as I'm not in the industry, its over my head.
I found this and this relating to Kobe steel's ITmk3 technolgoy, which you may find useful.
Hello friends,
The most important factor as to whether FWL will realise their goals is in the technology they end up using.
FWL have just sent samples to Japan to see if they are suitable for FASTMET ®, Corex, Circofer and a new emerging technology, ITmk3 ®.
Is there anyone out there who knows about these processes first hand?(especially ITmk3)?
I found these links, but as I'm not in the industry, its over my head.
I found this and this relating to Kobe steel's ITmk3 technolgoy, which you may find useful.
I have found anohter Iron Ore gem and unfortunately its started running alot sooner than I had hoped, so before it runs to far I'm starting an FWL thread.
This company is looking at producing Pig Iron which should generate $75m a yr in EBIT for 30yrs vs a current mkt cap of $21m
It has a largish low scal magnetite deposit,
We can expect a JORC in 1-2weeks
With a PFS By start of JULY,
I am seeking to get a discussion going to assess whether my assements of the company are reasonable
At 25c Current Mkt Cap = $21m
An EBIT of $75m a yr for 30yrs = NPV $1Billion+ (EBIT of $2.25Billion)
So I'd say once PFS is out I'd expect a mkt cap of $50m minimum = 60c
Advantages
- Management = Ex MIS MD in charge of their Magnetite Project, Excel Coal
- TOP 20 = Hold 80% so very tight
- Capital raisings will be done sparingly = When they issued rights options instead of being free or 1c they were at a 4c cost so company could raise $1m from the rights, sounds very very prudent to me
- Infrastructure amazing, on the main highway to Port Geralton = truck ore no rail! 14kms away from main town of Yalgoo, can use all exisiting port facilities, gas and water run through or near deposit
- Mkt cap tiny vs NPV
- Backed by Martin Place
- Pig Iron in high demand, much higher than magnetite ore as its a value added product
- Japanese Steel firm Kobe already taking Iron Ore samples, they could easily underwrite the development of Yogi project
Disadvantages
- Cap Ex = $350m+
It all looks good but I want to hear some others thoughts and feedback,
I found most of my info on the companies web
Project- http://www.ferrowest.com.au/yalgoo.html
Top 20 (old) - http://www.ferrowest.com.au/shareholders.html
Management - http://www.ferrowest.com.au/directors.html
And also recent announcements
p.s. DYOR!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?